SeaArtPrompting basics

SeaArt Prompts: How to Write Them for Any Model or Style

By Marco Cavazzana · Updated · 4 min read
ShareEmail
Short answer

A good SeaArt prompt names the subject first, adds setting, light and lens, puts any LoRA trigger words near the start and finishes with one or two style words. Pair it with a short negative prompt, match the prompt style to the model family you have selected, and reproduce an example image’s settings before changing anything.

SeaArt (seaart.ai) gives you a very large menu of community models and styles, which is both its strength and the reason prompts that work in one place fail in another. The same sentence behaves differently on an anime SDXL checkpoint, a photoreal checkpoint and a Flux-based model. This guide gives you a prompt structure that transfers, shows how to adapt it to each family, and explains how to borrow settings from images already on the site.

Start from an image, not a blank box

Every public image on SeaArt carries the data that made it: model, LoRAs, prompt, negative prompt, sampler, steps, CFG, seed and size. The fastest route to a working prompt is to find an image close to what you want, open its details and use the option that loads those settings into the generator. Run it unchanged once. If your result matches, you have a proven starting point, and every later difference is yours to learn from. Only then start editing the prompt.

Note the model family while you are there. SeaArt labels the base model on each checkpoint and LoRA (SD 1.5, SDXL, Flux and others), and LoRAs only work with checkpoints from the same family.

A prompt structure that transfers

Write in this order and most models will follow you:

  1. Trigger words. If a LoRA lists one, put it first, spelt exactly as the card shows.
  2. Subject and action. "a tired courier resting on a bicycle". One subject, one action, in plain words.
  3. Setting. "outside a late-night bakery, wet pavement".
  4. Light and time. "warm shop light spilling onto the street, blue hour".
  5. Camera. "35mm lens, eye level, shallow depth of field". This does more for realism than any quality word.
  6. Style, briefly. One or two terms: "documentary photograph" or "flat vector illustration". Avoid stacking ten.

Keep the whole thing under roughly 75 tokens on SD 1.5 and SDXL models. Longer prompts are processed in chunks and the later parts lose influence. If you need more, cut adjectives before you cut nouns.

Adapting to the model family

  • SDXL and SD 1.5 checkpoints. Comma-separated phrases work well. Emphasis syntax such as (red umbrella:1.3) is supported in most interfaces of this kind; use it on at most two elements. A negative prompt matters here.
  • Anime and illustration checkpoints. Many are trained on tag-style captions. Short tags separated by commas ("1girl, school uniform, rooftop, sunset") often beat sentences. The model card usually says which captioning style it expects.
  • Flux-based models. Prefer full sentences, respond poorly to quality padding, and often ignore or lack a negative prompt. Describe what you want to see, not what you want to avoid.
  • Photoreal checkpoints. Lens, light and film words are the levers. "Kodak-style colour" is a style; a brand logo in the frame is not something to prompt for.

Negative prompts and weighting

A negative prompt tells the model what to steer away from. A short general list covers most SDXL work: "blurry, low quality, deformed hands, extra fingers, text, watermark, cropped". Add a specific term only when a specific fault keeps appearing, such as "second person" when a single-subject prompt produces two. Very long negatives flatten detail, so trim them when results start looking waxy.

Weighting goes the other way. If the model keeps dropping an element, raise it to 1.2 or 1.3 with parentheses. If one element is taking over, lower it to 0.8. Change one weight at a time with a fixed seed so you can see the effect.

The prompt helper and when to use it

SeaArt, like most community platforms, includes tools that expand or translate a short prompt into a longer one. The exact name and placement change with updates, so look for an enhance or optimise option near the prompt box. It is useful for discovering vocabulary you had not thought of, and for non-native English writers who want idiomatic phrasing. It is less useful when you already know what you want, because it tends to add generic quality words and can shift the subject. Read what it produces, keep the phrases that add information and delete the rest.

Settings at a glance

SettingWhat it doesStart with
ModelBase look and familyOne whose examples match your goal
LoRA weightStrength of a style or subject add-onCard value, else 0.7
Prompt lengthHow much the model reads with full weightUnder 75 tokens on SD-family models
EmphasisRaise or lower one element(element:1.2) on one or two words
Negative promptWhat to avoidblurry, low quality, deformed hands, text, watermark
CFGPrompt adherence5 to 7 on SDXL, low on Flux
SeedReproducibilityFixed while editing a prompt

For a repeatable face or outfit across many images, see SeaArt consistent characters. For what sampler, steps and CFG do, see the Stable Diffusion prompts guide.

Try it

Model: a photoreal SDXL checkpoint
Prompt: a tired courier resting on a bicycle outside a late-night bakery, wet pavement, warm shop light spilling onto the street, blue hour, 35mm lens, eye level, shallow depth of field, documentary photograph
Negative prompt: blurry, low quality, deformed hands, extra fingers, text, watermark, cropped
Size: 1024x1024. Steps: 28. CFG: 6. Seed: fixed after the first run

Once you have a keeper, swap "documentary photograph" for "flat vector illustration" on the same seed. The composition will mostly hold while the style changes, which shows you how much of the image the style word controls on that model.

Frequently asked questions

Why does the same prompt look different on different SeaArt models?
Each checkpoint was trained on different images and captions, so it reads words differently. Anime models often expect tag-style prompts, photoreal SDXL models respond to lens and lighting terms, and Flux-based models prefer full sentences and usually ignore negative prompts. Match your prompt style to the model family shown on its card.
Should I use the SeaArt prompt enhancer?
Use it to discover vocabulary or to polish phrasing if English is not your first language. Then read the result and remove generic quality words that add nothing. If you already know exactly what you want, a short hand-written prompt is usually more controllable.
How long should a SeaArt prompt be?
On SD 1.5 and SDXL models, stay under roughly 75 tokens, because longer prompts are read in chunks and later parts carry less weight. Put the subject and any trigger words in the first few words. On Flux-based models you can write longer natural sentences, but clarity still beats length.

Nothing you makeis lost.

Free · No card · Read-only · 2-minute setup

DreamdriveFree plan · Chrome
Add to Chrome — it’s free